20ton slurry ice maachine
20ton slurry ice maachine

Slurry ice application fields

● Aquatic products processing

● Meat processing

● Fishery industry

● Vegetable preservation

● Supermarket or other commercial usage

● Cold storage project

● Temperature reduction project

System principle of slurry ice machine

——Through the bottom of ice-crystal separating tank D, brine is pumped by circulating pump C into the ice maker. The pure water , contained in brine, can then either separate out ice crystal or turn into supercooled water that go back o the tank D again. Later, the supercooled water will separate out ice crystal in the ice-crystal separating tank D. Resulting from buoyancy, crystals set apart from water and distribute to the upper part of the tank D, while brine, locating below, would be pumped back to the ice maker A by ice making water circulation pump C. Repeatedly circulate.

——The ice scraper , mounted on the top of the tank D, would scrape out the ice crystals while in need. Crystals would be delivered to the ice storage tank or slurry ice reproducer, inside which the ice crystal and the water would mix and agitate, according to the pre-calculated recipe , to form slurry ice and pumped to each ice destination by slurry ice pump F.

——Salting tank B is required when using pure water or low concentration brine. Brine pump, equipped on the salting tank, will control over its operation via brine concentration sensor and controller to automatically maintain brine(in the tank D) concentration within setting range.

——When the rate of ice crystal is less demanded, ice maker A and reproducer F can be connected directly for periodic interval ice making. Ice maker will stop running when the crystal rate meeting requirement, while the slurry ice reproducer would work. The slurry ice produced would be pumped out by the slurry ice pump G. Circulation pump E, the same as circulation pump C, would circulate water.


Slurry ice machine features:

1,Reliable and adaptable

2,Efficient heat exchange and min. Salinity

3,High refrigeration efficiency

4,Hygienic standards

5,Superior performance

6,Compact and un-limited location pumped

7,Flexible application and multi-function

8,Comprehensive solutions

Models available:

 

Model

UKSI50W-1

UKSI100W-1

UKSI150W-1

UKSI200W-1

Norminal refrigeration capacity (Condensing Temperature 35)

9.6kw

19.2kw

27.5kw

40.2kw

8,259kal/h

16,500kcal/h

23,600kcal/h

34,560kcal/h

Max.Ice output(Sea water temperature 5)

5t/24h

10t/24h

15t/24h

20t/24h

208kg/h

412kg/h

625kg/h

833kg/h

Rated power

4.8kw

9.2kw

13.7kw

22kw

Power system

380V/50Hz/3P

Refrigerant

R22(Optional:R404A/R507)

Ice making resource

Seawater, Salt water or glycol

Min.Salt content of water

0.25%NaCL

Ice water temperature

0-35

Cooling water inlet temperature

3m³/h

6m³/h

10m³/h

18m³/h

Condenser

Water cooling (air cooling condenser available)

Cooling water inlet temperature

25

Water inlet pressure

3.5bar

Compressor

Bitzer semi-hermetic reciprocating/piston compressor

Evaporator

Material:Stainless steel 316L

IP Protecting grade

IP54(Higher configuration customerized)

Outline dimension(L*W*H)

800*800*1825

1000*1000*1825

1500*1200*1825

2000*1500*1825

Weight

550kg

850kg

1200kg

1800kg